Construction Of 2000w Dual Cell Power Inverter

  • : Format
  • : Pages
  • :
  • : Chapters
  •  
  • Click to DOWNLOAD Materials

CONSTRUCTION OF 2000W DUAL CELL POWER INVERTER

Dual Cell

ABSTRACT

In Nigeria today power failure has been a thing we experience every day, and this leads to complete blackout at different houses, and its stoppage of production in some company. This serve as challenges to Electrical Engineers. This project, construction of 2000W power inverter is arrangement of circuit unit that can provide an uninterrupted power supply which can last for a particular time, this inverter can be describe as a device the convert direct current D.C to the alternating curetting A.C this inverter that we are talking about is applicable in the following places, e.g houses, offices, industries, company etc. the construction of 2000W power inverter it can serve the four bedroom flat without use heavy load like Air condition, Iron, corker etc. using of power inverter it reduces problem of bed power supply in Nigeria.

 TABLE OF CONTENT

Title page

Certification

Dedication

Acknowledgement

Abstract

Table of content

 CHAPTER ONE

1.0       Introduction

1.1       Aims and objective

 CHAPTER TWO

2.0       Literature review

2.1       Block diagram

2.2       List of components

2.3       Methodology

 CHAPTER THREE  

3.0       Circuit diagram

3.1       principle mode of operation

3.2       Oscillatory circuit

CHAPTER FOUR

4.0       Casing diagram

4.1       Problem encountered and solution

4.2       Tests carried out

CHAPTER FIVE

5.0       Conclusion and recommendation

5.1       Bill of engineering measurement and evaluation

5.2       References

 CHAPTER ONE

 1.0       INTRODUCTION

Multilevel voltage source converters are widely used in industrial inverter application and recently a generalized inverter structure has been proposed. Which include the flying capacitor and diode clamped multilevel inverter.  The generalized structure is developed from a generalized cell, called the PZ cell.  He interconnection of PZ cell, two level phase legs, leads to multilevel legs capable at additional voltage level. As the multilevel inverter is suited to high voltage application the expectation is that the duality transform, when applied to the generalized range of conversions with advantages for high current application.  Also, the origins of electromechanical inverter explain the source of the term inverter. Early AC – to – DC converter used on induction or synchronous AC motor direct connected to a generator so that the generation’s commutator reversed its connections at exactly the right moment to produce DC.

A later development is the synchronous converter, in which the motor and generator windings are combined into none armature with slip rings at one end and a commutator at the other end only one field frames. The result with either is AC – in – DC out, with a M.G set, the DC can be considered to be separately generated from the AC withy a synchronous converter, in a certain sense it can be considered to be mechanically rectified AC. Given the right auxiliary and control equipment an M – G set or rotary converter can be “run backward”, converting DC to AC. Hence an inverter is an inverted converter. Dual Cell

 1.1       AIMS AND OBJECTIVES

The aims and objectives of inverter are:

i.          A power inverter change DC power from a battery into conventional AC power that you can use to operate all kind of devices e.g electric light, kitchen appliances, microwaves, power tools, TVs, radios, computers to name just a few, we just connect the inverter to a battery and plug other AC device into the inverter and we have got portable power. Dual Cell

ii.         The inverter drawn its power from a volt battery or several batteries wired in parallel. The battery will round to be recharged as the power is drawn out of it by the inverter. The battery can be recharged by running the automobile motor or a gas generator, solar panel or wind or you can use a battery charger plugged into on AC outlet to recharge the batteries. Dual Cell

iii.        Using an inverter for emergency home backing power. A very simple way to use an inverter for emergency power (such as during a power outage) is to use a car battery and an extension card running into the house where you can then plug in electrical appliances. Dual Cell

 AREAS OF APPLICATION

Inverter are used in the different areas, they are:

It is use in the offices. It applicable at home It applicable in industries. It used for emergency electricity. Dual Cell

WHY THIS PROJECT NECESSARY  POWER INVERTER: –

It has moved up in the rank of importance in everyday life because our lives have become more mobile. Whether we are out of the office from work or for play, we can have our office with us. Having an office requires household power. With good power inverters we can run our laptop, printer, skill saw, digital comment and much more, power inverter have really supplied us with truly mobile world. I expect that power inverters will be incorporated into more vehicles in the future why your power inverters wait for the future get now. Also it is source as source of power when there is power failure, I is sources as sourced income for the people. Dual Cell

Sharing is caring!

Leave a Reply