- : Ms Word, Ms Word Format
- : 70 Pages
- : ₦3,000 | $25 | ₵60 | Ksh 2720
- : 1-5 Chapters
- Click to DOWNLOAD Materials
DESIGN AND CONSTRUCTION OF A PIR SENSOR BASED SECURITY SYSTEM
This electronic security system can be used in banks and other high security areas. A normal electronic security system will have a transmitter and a receiver. The transmitter sends out an IR laser and this will be received by the receiver. When an intruder walks past the device, the IR beam is cut and thus the alarm is activated.
Instead of infrared or laser transmitters and receivers, PIR (Passive Infrared Radial) sensors are used in this circuit. The sensor is basically a pyroelectric device. When the device is exposed to infrared radiation, it generates an electric charge. The device is made of crystalline material. According to the change in the amount of infrared striking the element, there will be a change in the voltages generated, which is measured by an on-board amplifier.
Title Page———i
Certification——–ii
Dedication———iii
Acknowledgement——-iv
Abstract ———vi
Table of Content——–vii
Chapter One
1.0 Introduction ——-1
1.1 Statement of Problem——4
1.2 Purpose of the Study——5
1.3 Significance of Study——8
1.4 Limitation——–9
1.5 Scope of Study——-11
Chapter Two
2.0 Review of Related Literature —-12
2.6 Summary of Literature Review—- 19
Chapter Three
3.0 Research Methodology and Procedure—22
3.1 Population ——–22
3.2 Sample and Sampling Technique—-22
3.3 Validation of the Instrument —-23
3.4 Reliability of the Instrument —–23
3.5 Data Analysis——-23
Chapter Four
4.0 Presentation and Discussion of Result—24
4.1 Analysis and interpretaion of Data—25
4.2 Discussion of Results——38
Chapter Five
5.0. Summary, Conclusion, and Recommendation –40
5.1 Summary——–40
5.2 Conclusion——–41
5.3 Recommendation——42
References ———45
Appendix 1——–47
Appendix ———50
DESIGN AND CONSTRUCTION OF A PIR SENSOR BASED SECURITY SYSTEM
